Identification of a circulating three-miRNA panel for the diagnosis of primary open angle glaucoma.

PURPOSE: Conventional diagnosis of primary open angle glaucoma (POAG) needs a combination of ophthalmic examinations. An efficient assay is urgently needed for a timely POAG diagnosis. We aim to explore differential expressions of circulating microRNAs (miRNA) and provide novel miRNA biomarkers for POAG diagnosis. METHODS: A total of 180 POAG patients and 210 age-related cataract (ARC) patients were enrolled. We collected aqueous humor (AH) and plasma samples from the recruited patients. The expressions of candidate miRNAs were measured using quantitative real time polymerase chain reaction. The diagnostic ability of candidate miRNAs was analyzed by receiver operating characteristic curve. RESULTS: The expressions of miR-21-5p and miR-29b-3p were downregulated significantly in AH and plasma of POAG and miR-24-3p expression was significantly increased in AH and plasma of POAG, comparing with those of ARC. A three-miRNA panel was constructed by a binary logistic regression. And the panel could differentiate between POAG and ARC with an area under the curve of 0.8867 (sensitivity = 78.0%, specificity = 83.3%) in aqueous humor and 0.7547 (sensitivity = 73.8%, specificity = 81.2%) in plasma. Next, we verified the three-miRNA panel working as a potential diagnostic biomarker stable and reliable. At last, we identified related function and regulation pathways in vitro. CONCLUSIONS: In conclusion, we built and identified a circulating three-miRNA panel as a potential diagnostic biomarker for POAG. It may be developed into an efficient assay and help improve the POAG diagnosis in the future.

Improving the Efficiency and Stability of MAPbI3 Perovskite Solar Cells by Dipeptide Molecules.

Passivating the electronic defects of metal halide perovskite is regarded as an effective way to improve the power conversion efficiency (PCE) of perovskite solar cells (PVSCs). Here, a series of dipeptide molecules with abundant ─C═O, ─O─ and ─NH functional groups as defects passivators for perovskite films are employed. These dipeptide molecules are utilized to treat the surface of prototype methyl ammonium lead iodide (MAPbI3 ) films and the corresponding PVSCs exhibit enhanced photovoltaic performance and ambient stability, which can be ascribed to: 1) the ─C═O and ─O─ can interact with the undercoordinated Pb2+ ions and the ─NH groups can form hydrogen bonds with the I- ions, passivating the defects in perovskite film and reducing charge recombination in PVSCs; 2) the long alkyl chain of dipeptide molecules increases the hydrophobicity of the perovskite surface and thus enhance the stability of PVSCs. The passivated MAPbI3 -based PVSCs exhibit a champion PCE of 20.3% and retain 60% of the initial PCE after 1000 h. It is believed that the defects passivation engineering using polypeptide moleculars can be applied in other perovskite compositions for high device efficiency and stability.

Terpenoids from Euphorbia helioscopia and Their Cytotoxic Activities against H1975 Cells.

Three previously undescribed diterpenoids, helioscopnoids A-C, and eight known compounds were isolated from the whole plants of Euphorbia helioscopia. Their structures were established by extensive analysis of spectra and data comparison with previous literatures. Among them, compound 4 was identified as 24,24-dimethoxy-25,26,27-trinoreuphan-3ß-ol with revised configurations of C-13, C-14, and C-17 (13R*, 14R*, 17R*). Cytotoxicity assays revealed that all compounds exhibited varying levels of cytotoxicity against H1975 cells, with compound 9 displaying the most potent activity, as indicated by cell viability rates of 18.13 % and 20.76 % at concentrations of 20 µM and 5 µM, respectively. This study expands the understanding of E. helioscopia terpenoids' structural diversity and biological activities, contributing to the exploration of potential therapeutic applications.

Full length transcriptomes analysis of cold-resistance of Apis cerana in Changbai Mountain during overwintering period.

Apis cerana in Changbai Mountain is an ecological type of Apis cerana, which is an excellent breeding material with cold-resistant developed by long-term natural selection under the ecological conditions. However, the physiological and molecular mechanisms of Changbai Mountain population under cold stress are still unclear. In this study, the Nanopore sequencing was carried out for the transcriptome of Apis cerana in Changbai Mountain in the coldest period of overwintering, which will provide a reference to the cold-resistant mechanism. We determined 5,941 complete ORF sequences, 1,193 lncRNAs, 619 TFs, 10,866 SSRs and functional annotations of 11,599 new transcripts. Our results showed that the myosin family and the C2H2 zinc finger protein transcription factor family possibly have significant impacts on the response mechanism of cold stress during overwintering. In addition, the cold environment alters genes expression profiles in honeybees via different AS and APA mechanisms. These altered genes in Hippo, Foxo, and MARK pathways help them counter the stress of cold in overwinter period. Our results might provide clues about the response of eastern honeybees to extreme cold, and reflect the possible genetic basis of physiological changes.

Discussion on Design of Comprehensive Verification and Evaluation Schemes for Electrocardiogram Medical Electronic Instruments / 中国医疗器械杂志

This study introduced the current testing content and standards of ECG medical electronic instruments, combined with actual clinical needs, and discussed the comprehensive verification and evaluation protocol for ECG medical electronic instruments. The protocol mainly includes hardware performance testing, automatic diagnostic function testing and clinical application evaluation. The protocol emphasizes the clinical practicality and importance of the comprehensive verification and evaluation program, and provides a reference for the institutions involved in the program.

Tumor microenvironments self-activated nanoscale metal-organic frameworks for ferroptosis based cancer chemodynamic/photothermal/chemo therapy

Ferroptosis, as a newly discovered cell death form, has become an attractive target for precision cancer therapy. Several ferroptosis therapy strategies based on nanotechnology have been reported by either increasing intracellular iron levels or by inhibition of glutathione (GSH)-dependent lipid hydroperoxidase glutathione peroxidase 4 (GPX4). However, the strategy by simultaneous iron delivery and GPX4 inhibition has rarely been reported. Herein, novel tumor microenvironments (TME)-activated metal-organic frameworks involving Fe & Cu ions bridged by disulfide bonds with PEGylation (FCSP MOFs) were developed, which would be degraded specifically under the redox TME, simultaneously achieving GSH-depletion induced GPX4 inactivation and releasing Fe ions to produce ROS

Establishment of Application Database for Electrocardiograph in Different Scenes / 中国医疗器械杂志

It is significant to establish scene ECG database which improves the automatic diagnostic function of electrocardiograph under different application scenarios. We built the ECG database in different scene according to the hospital level (grade 3, grade 2, grade 1) and clinical environment (intensive care and acute wards, outpatient clinics and general wards). Sample size was obtained according to the incidence of various ECG diagnoses. The database covers ECG signal, ECG waveform, ECG characteristic values, ECG diagnostic results by experts and clinical information of patients etc. It not only provides important reference for electrocardiograph manufacturers to evaluate and test the parameters of automatic diagnosis under different clinical scene, but also provides valuable scientific research and teaching resources for medical workers.

Enhanced Self-Assembly of Crystalline, Large-Area, and Periodicity-Tunable TiO2 Nanotube Arrays on Various Substrates.

Due to their superior physical properties, titanium dioxide (TiO2) nanotube arrays are one of the most investigated nanostructure systems in materials science until now. However, it is still a great challenge to achieve damage-free techniques to realize controllable, cost-effective, and high-performance TiO2 nanotube arrays on both rigid and flexible substrates for different technological applications. In this work, we demonstrate a unique strategy to achieve self-assemble crystalline, large-area, and regular TiO2 nanotube arrays on various substrates via hybrid combination of conventional semiconductor processes. Besides the usual applications of TiO2 as carrier transport layers in thin-film electronic devices, we demonstrate that the periodic TiO2 nanotube arrays can show the effect of optical grating with large-area uniformity. Specifically, the fabricated nanotube geometries, such as the tube height, pitch, diameter, and wall thickness, as well as the crystallinity can be reliably controlled by varying the processing conditions. More importantly, utilizing these nanotube arrays in perovskite solar cells can further enhance the optical absorption, leading to improved power conversion efficiency. In contrast to other typical template-assisted fabrication approaches, we employ a soft template here, which would enable the construction of nanotube arrays without any significant damage associated with template removal. Furthermore, without the thermal restriction of underlying substrates, these crystalline nanotube arrays can be transferred to mechanically flexible substrates by a simple one-step method, which can expedite these nanotubes for potential utilization in other application domains.

Probing the Energy Level Alignment and the Correlation with Open-Circuit Voltage in Solution-Processed Polymeric Bulk Heterojunction Photovoltaic Devices.

Energy level alignment at the organic donor and acceptor interface is a key to determine the photovoltaic performance in organic solar cells, but direct probing of such energy alignment is still challenging especially for solution-processed bulk heterojunction (BHJ) thin films. Here we report a systematic investigation on probing the energy level alignment with different approaches in five commonly used polymer:[6,6]-phenyl-C71-butyric acid methyl ester (PCBM) BHJ systems. We find that by tuning the weight ratio of polymer to PCBM the electronic features from both polymer and PCBM can be obtained by photoemission spectroscopy. Using this approach, we find that some of the BHJ blends simply follow vacuum level alignment, but others show strong energy level shifting as a result of Fermi level pinning. Independently, by measuring the temperature-dependent open-circuit voltage (VOC), we find that the effective energy gap (Eeff), the energy difference between the highest occupied molecular orbital of the polymer donor (EHOMO-D) and lowest unoccupied molecular orbital of the PCBM acceptor (ELUMO-A), obtained by photoemission spectroscopy in all polymer:PCBM blends has an excellent agreement with the extrapolated VOC at 0 K. Consequently, the photovoltage loss of various organic BHJ photovoltaic devices at room temperature is in a range of 0.3-0.6 V. It is believed that the demonstrated direct measurement approach of the energy level alignment in solution-processed organic BHJ will bring deeper insight into the origin of the VOC and the corresponding photovoltage loss mechanism in organic photovoltaic cells.

Effect of mechanically damaged starch from wheat flour on the quality of frozen dough and steamed bread.

The influence of damaged starch (DS) on the quality of frozen dough and steamed bread were investigated. Characterization of the farinographical properties showed that DS levels affected water absorption, development, weakness, falling number and gluten index. Flour viscosity profiles indicated that pasting temperatures increased, but peak viscosity, low viscosity, breakdown, final viscosity and setback increased and then decreased with increasing amounts of DS. Compared to leavened dough, unleavened dough had significantly higher peak times, of T21 and T22, and was also affected by DS concentration. Steamed bread had a higher specific volume, relatively lower hardness, exhibited more whiteness, and a higher degree of gumminess and chewiness with higher DS levels. We compared two methods of making steamed bread and assessed the quality of the product. We found that an appropriate DS content improved the quality of frozen dough and steamed bread. This study provides the basis for future development and improvements to methods for making frozen dough products.

Decomposition of Organometal Halide Perovskite Films on Zinc Oxide Nanoparticles.

Solution processed zinc oxide (ZnO) nanoparticles (NPs) with excellent electron transport properties and a low-temperature process is a viable candidate to replace titanium dioxide (TiO2) as electron transport layer to develop high-efficiency perovskite solar cells on flexible substrates. However, the number of reported high-performance perovskite solar cells using ZnO-NPs is still limited. Here we report a detailed investigation on the chemistry and crystal growth of CH3NH3PbI3 perovskite on ZnO-NP thin films. We find that the perovskite films would severely decompose into PbI2 upon thermal annealing on the bare ZnO-NP surface. X-ray photoelectron spectroscopy (XPS) results show that the hydroxide groups on the ZnO-NP surface accelerate the decomposition of the perovskite films. To reduce the decomposition, we introduce a buffer layer in between the ZnO-NPs and perovskite layers. We find that a commonly used buffer layer with small molecule [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) can slow down but cannot completely avoid the decomposition. On the other hand, a polymeric buffer layer using poly(ethylenimine) (PEI) can effectively separate the ZnO-NPs and perovskite, which allows larger crystal formation with thermal annealing. The power conversion efficiencies of perovskite photovoltaic cells are significantly increased from 6.4% to 10.2% by replacing PC61BM with PEI as the buffer layer.

Controllable Synthesis of Bandgap-Tunable CuSx Se(1-x) Nanoplate Alloys.

Composition engineering is an important approach for modulating the physical properties of alloyed semiconductors. In this work, ternary CuS(x)Se(1-x) nanoplates over the entire composition range of 0≤x≤1 have been controllably synthesized by means of a simple aqueous solution method at low temperature (90 °C). Reaction of Cu(2+) cations with polysulfide/-selenide ((S(n)Se(m))(2-)) anions rather than independent S(n)(2-) and Se(m)(2-) anions is responsible for the low-temperature and rapid synthesis of CuS(x)Se(1-x) alloys, and leads to higher S/Se ratios in the alloys than that in reactants owing to different dissociation energies of the Se-Se and the S-S bonds. The lattice parameters 'a' and 'c' of the hexagonal CuS(x)Se(1-x) alloys decrease linearly, whereas the direct bandgaps increase quadratically along with the S content. Direct bandgaps of the alloys can be tuned over a wide range from 1.64 to 2.19 eV. Raman peaks of the S-Se stretching mode are observed, thus further confirming formation of the alloyed CuS(x)Se(1-x) phase.

Effect of allitridum on remodeling of the transient outward potassium current of ventricular myocytes of spontaneously hypertensive rats / 药学学报

We aimed to study the effect of allitridum (All) on the transient outward potassium current (Ito) of ventricular myocytes of spontaneously hypertensive rats (SHR). Totally 30 male SHRs were randomly divided into three groups: low-dose All group (7.5 mg·kg(-1)), high-dose All group (15.0 mg·kg(-1)) and normal saline group. The other 10 sex and age matched Wistar-kyoto rats (WKY) were also taken as control group (WKY group). All animals received i.p. administration for 8 weeks. The dual enzymatic method was used to separate single ventricular myocyte from animals. Patch-clamp technique was used to record Ito and analyze the effect of All on the current. It was shown that the left ventricular hypertrophy of SHR was reversed significantly by All. Furthermore, the density of Ito was recovered in both high and low dose All groups. The peak current densities of Ito were enhanced from 18.23±3.64 to 25.17±2.86 pA/pF (P<0.01) and 36.47±5.42 pA/pF (P<0.01) at +50 mV by All 7.5 mg·kg(-1) and 15.0 mg·kg(-1), respectively, which was not significantly different with WKY group. The effect was associated with positive shift of the steady-state, close-state inactivation, and shortened recovery from inactivation of Ito. It is concluded that All decreases the remodeling of Ito of ventricular hypertrophic myocytes of SHR.

Effect of allitridum on remodeling of the transient outward potassium current of ventricular myocytes of spontaneously hypertensive rats / 药学学报

We aimed to study the effect of allitridum (All) on the transient outward potassium current (Ito) of ventricular myocytes of spontaneously hypertensive rats (SHR). Totally 30 male SHRs were randomly divided into three groups: low-dose All group (7.5 mg·kg(-1)), high-dose All group (15.0 mg·kg(-1)) and normal saline group. The other 10 sex and age matched Wistar-kyoto rats (WKY) were also taken as control group (WKY group). All animals received i.p. administration for 8 weeks. The dual enzymatic method was used to separate single ventricular myocyte from animals. Patch-clamp technique was used to record Ito and analyze the effect of All on the current. It was shown that the left ventricular hypertrophy of SHR was reversed significantly by All. Furthermore, the density of Ito was recovered in both high and low dose All groups. The peak current densities of Ito were enhanced from 18.23±3.64 to 25.17±2.86 pA/pF (P<0.01) and 36.47±5.42 pA/pF (P<0.01) at +50 mV by All 7.5 mg·kg(-1) and 15.0 mg·kg(-1), respectively, which was not significantly different with WKY group. The effect was associated with positive shift of the steady-state, close-state inactivation, and shortened recovery from inactivation of Ito. It is concluded that All decreases the remodeling of Ito of ventricular hypertrophic myocytes of SHR.

Energy-band engineering for tunable memory characteristics through controlled doping of reduced graphene oxide.

Tunable memory characteristics are used in multioperational mode circuits where memory cells with various functionalities are needed in one combined device. It is always a challenge to obtain control over threshold voltage for multimode operation. On this regard, we use a strategy of shifting the work function of reduced graphene oxide (rGO) in a controlled manner through doping gold chloride (AuCl3) and obtained a gradient increase of rGO work function. By inserting doped rGO as floating gate, a controlled threshold voltage (Vth) shift has been achieved in both p- and n-type low voltage flexible memory devices with large memory window (up to 4 times for p-type and 8 times for n-type memory devices) in comparison with pristine rGO floating gate memory devices. By proper energy band engineering, we demonstrated a flexible floating gate memory device with larger memory window and controlled threshold voltage shifts.

Extraction, characterization and spontaneous emulsifying properties of pectin from sugar beet pulp.

The effects of organic acid extractants on the yield and characteristics of pectin from sugar beet pulp were investigated with citric acid, malic acid and lactic acid at different pH (1.5 and 2.0) and time (1 h and 2 h). The results demonstrated that the yields of pectins were directly correlated with the decrease of pH and reaction time, and the optimum yield of 17.2% was obtained at pH 1.5 and 2 h. Furthermore, the acid type also affected the physicochemical characteristics of pectin, especially on the esterification degree (42-71), galacturonic acid content (60.2-77.8%), emulsion activity (35.2-40.1%) and emulsion stability (62.1-79.4%), and a relatively single pectin mainly consisted of homogalacturonan could be obtained under a suitable reaction condition, which was an excellent crude material for the production of emulsion activity.

A versatile triphenylamine/fluoranthene-based derivative as a nondoped green-emitting, hole-transporting interlayer for electroluminescent devices.

A new triphenylamine-bridged fluoranthene derivative, 4-(7,10-diphenylfluoranthen-8-yl)-N-[4-(7,10-diphenylfluoranthen-8-yl)phenyl]-N-phenylaniline (BDPFPA), with a high glass transition temperature of 220 °C has been synthesized and characterized. BDPFPA is a highly fluorescent and versatile material that can be used as a nondoped green emitter and as a hole transporter. BDPFPA was used in a standard trilayer device as the emitting layer, which showed a low turn-on voltage (<3 V) and a high efficiency of 11.6 cd A(-1). The device also shows little efficiency roll-off at high brightness. For example, the efficiency can still be maintained at 11.4 cd A(-1) (5.4 lm W(-1)) at a brightness of 10,000 cd m(-2). These results are among the best reported for nondoped fluorescent green organic light-emitting diodes. A simple bilayer device, in which BDPFPA serves as a hole-transporting layer, has a maximum power efficiency of 3.3 lm W(-1) and the performance is nearly 40 % higher than that of an N,N'-bis(1-naphthyl)-N,N'- diphenyl-1,1'-biphenyl-4,4'-diamine (NPB)-based standard device.

Highly active and enhanced photocatalytic silicon nanowire arrays.

Nanoporous and nonporous three-dimensional silicon nanowire arrays (SiNWAs) prepared with metal-assisted chemical etching method were investigated as photocatalysts in dye photodegradation systematically. In comparison with nonporous SiNWAs, nanoporous SiNWAs have higher surface area, larger pore volume, stronger light absorption and better photocatalytic activity. After the HF-treatment, the photocatalytic activity of all kinds of SiNWAs increased significantly and the nanoporous SiNWAs showed excellent stability. The photocatalytic activity of different types of SiNWAs with hydrogen surface termination can be recovered by HF treatment. This study also reveal that the hydrogen terminated surfaces on silicon nanowires (SiNWs) enhance the performance of SiNWAs by increasing their photocatalytic activity.